Skip to content
uDevices

Getting Started With uMyo - Power on/off

  1. Before turning on, you need to attach the battery to the uMyo:

You can use a battery with a JST connector cable (links to suitable ones can be found above); You can also solder any lipo battery directly to BAT+ and BAT- pads on uMyo; Always use only one battery for all connected uMyo devices; After plugging the battery, it’s ready for use; Charging the battery: you can plug a USB-C cable into any uMyo connected to the battery to charge it, even if it’s one of several uMyos connected together. 2. Press button to turn uMyo on;

  1. You should see several LED blinks: - red-red-green, blue, then it will blink 3 times indicating current radio mode:

pink - nRF24 mode blue - BLE mode green - PC station mode 4. Turning off: hold button for more than 2 seconds. LED will switch from blue to red, release the button -> uMyo stays off.

See video instruction for more details: